Induction & Intercooling

FMINDK45 is the Forge cold air induction system for the Hyundai i20N. As with all manufacturers in recent times, the need to make smaller capacity engines more powerful with better efficiency, has been the engineer’s top priority. To achieve these goals, the designers have...

Lifetime warranty* Washable and reusable design Gains of 5 bhp and 6lb/ft torque Designed and manufactured in Great Britain Improvement in engine power and torque Designed to flow stronger for longer Fitting is straightforward and can be completed in 20-30 minutes No cutting or...

Average gains of 5.5bhp Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9 Average gain of 20NM of torque Prepreg 2x2 twill formed carbon fibre Dyno proven Great induction noise More responsive throttle Lifetime Warranty With the release of...

Gains of 13bhp Peak torque gains of 8nm High quality carbon fibre Pleated performance air filter No engine management check lights (EML)  Increased air flow   Lifetime warranty* The Toyota Yaris GR has proven itself to be a fantastically capable vehicle since its release, and the development team...

After discussions with many GR Yaris owners about airbox modifications, Forge Motorsport are proud to release the Toyota Yaris GR Inlet Duct. The Forge inlet duct allows you to add an aesthetically pleasing carbon fibre part to your Yaris GR’s engine bay and help...

The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the...

The Renault Megane RS 280/300 intake is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives:  Maintain low inlet temperatures in comparison to other aftermarket induction kits   Improved air flow  Look aesthetically pleasing and enhances the look of your engine bay  Our first criteria has been met by enclosing the PRORam filter...

This is a replacement pleated filter canister for the FMINDF500 induction kit that is for the Fiat 500/595/695 Fits: Fiat 500 500 Abarth Fiat 595 145BHP Fiat 595 > Turismo 165BHP Fiat 595 Competizione 180BHP Fiat 595 Trofeo 160BHP Fiat 695 > Rivale 180BHP Fiat...

This is a replacment pleated filter for the FMINDK28 induction kit that is for the Hyundai i30N/Veloster N. The filter is 260mm high, 190mm wide at the neck, 120mm wide at the end cap. The filter neck has an inner diameter of 101mm.   Fits:...

Gains of 11bhp Improvement of 13lb/ft of torque Choice of hose colour Improved driving experience Made in the UK Lifetime warranty Forge are proud to present the high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from...

After the success of our Intake system for the RHD Suzuki swift Sport (ZC33S), due to popular demand we wanted to give left hand drive Swift owners an equivalent aftermarket intake filtration system. Several months of testing were spent developing a kit with all the same...

If you are in the UK, you can purchase this product exclusively from Jimny Style! 01625 813365 Forge are excited to present our Hi Flow intake system for the Suzuki Jimny. Many months and man hours of development have gone into this product to achieve our...

This is the scoop/duct used for our intake kit on a Mk5 VW Golf R32 and by popular demand it is now available as it's own part!  It mounts perfectly in the front of the engine bay where it can be attached to your intake,...

This product is ideally fitted in conjunction with the product FMDV1-GTE (1.2/1.4 TSI Dump valve and fitting kit). If purchased as a stand-alone product the turbo inlet hose will push up against the adjacent OE charge pipe, and a trim to the turbo inlet leg...

This Forge intake kit is for the VW Up 1.0 TSI and GTI. Our intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and for a hard wearing finish. This has a dual purpose of protecting the filter from heat soak. (A replacement filter...

Increased power and torque output Improved sound characteristics of the engine  Improved visual impact of the engine bay During our testing, we found that the location of the original air box was susceptible to a vast amount of heat soak. This is because the...

Secondary air flow filter for the Golf Mk7 with Secondary Air Injection (SAI) Some VW Golf Mk7’s have a secondary air intake pipe connected to the side of the stock airbox. If you have an aftermarket intake kit that does not cater for this,...

This part has been developed in conjunction with our work on the BTCC championship winning Hyundai i30N's - read more here Forge Motorsport are excited to present our industry leading intake for the Hyundai i30N, Kona N, and Veloster N. This aftermarket cold air intake system...

This Forge Motorsport intake kit is for the SKODA FABIA 1.0 TSI 2017 onwards. This intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and hard wearing finish. This has a dual purpose of drawing air from the cold air...

Washable and reusable design filter. Layered multi-density foam technology. Designed and manufactured in Great Britain. Improvement in engine power and torque  Superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. This induction kit has been developed to fit Mini...