-
Vendor:Forge Motorsport
Turbo Inlet for Hyundai i20N
With Forge Motorsport leading the way in aftermarket products for the Hyundai N division vehicles, we are proud to present our Turbo Inlet Adaptor and Intake Tract for the Hyundai i20N. The kit is a full plug and play solution, with a replacement cast...- £239.99
- £239.99
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Blanket for Fiat Abarth 500/595/695 (IHI Turbo)
Highlights: Direct replacement Full stainless steel fitting kit included Withstands temperatures of 1200°C High temperature Silica fabric Carbon fabric outer shell Stainless Steel Rivets / Eyelets FMTUBL16 is a turbo blanket which has been designed as a bespoke heat management blanket which is tailored...- £89.99
£119.99- £89.99
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Blanket for Renault Megane Mk2 & Mk3 R.S
The Forge Motorsport FMTUBL15 has been designed specifically for the Renault Megane Mk2 & Mk3 R.S range stock turbo chargers. This turbo blanket replaces the primitive OE heat shield and is designed to further isolate the radiant heat produced by the turbocharger. The Forge turbo blanket also incorporates further...- £119.99
£149.92- £119.99
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Blanket for the Peugeot 308 GTI MK2 (2015-2020)
Fits Peugeot 308 GTI MK2 Proven to withstand temperatures up to 2500°F or 1370°C Prolongs the life of engine components Improves the appearance of the 308’s engine bay Stainless Steel Rivets and Fasteners Carbon fabric outer shell Calcium Magnesium Silicate Wool constructed Inner Core High temperature...- £149.92
- £149.92
- Unit price
- per
-
Vendor:Forge Motorsport
T3 Turbo Blanket
The Forge Motorsport FMTUBL13 has been designed for the use with externally wastegated Garrett GT3071R, GTX3076R, and G25-550 and KP39, Comp-RS341 turbochargers. The turbo blanket also fits some internally gated turbo and is not limited to the above application list. This turbo blanket is...- £109.22
- £109.22
- Unit price
- per
-
Vendor:Forge Motorsport
T25/T28 Turbo Blanket
The Forge Motorsport FMTUBL12 has been designed for the use specifically with the externally wastegated Owen Developments GBT-5465-HTA Turbocharger as used and developed on our Forge Motorsport Mk1 Golf Demo Race car. The application also fits but is not limited to Garrett GT2254R, GT2560R,...- £109.22
- £109.22
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Inlet Adaptor for Audi, Cupra, Skoda, VW
Increases of up to 8bhp Increases of 11 lb/ft torque Manufactured from cast aluminium for maximum clearance and excellent flow. Black coating for ultimate protection and durability. Increased capacity of over 40% No engine check lights (EML) Increased air flow Lifetime warranty Please note, if...- £244.79
- £244.79
- Unit price
- per
-
Vendor:Forge Motorsport
Dump Valve for Peugeot 308 GTI MK2 (2015-2021)
Utilising world leading springs for more precise operation and consistency All internal and external valve components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals The piston valve uses heat stabilised Viton O-rings Lubricated...- £213.60
- £213.60
- Unit price
- per
-
Vendor:Forge Motorsport
Hyundai i20N & Elantra N Line Atmospheric and Recirculating Dump Valve
This part replaces OEM Part No. 28234-2S300 Highlights: Utilising world leading springs for more precise operation and consistency All internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals The piston uses...- £204.50
- £204.50
- Unit price
- per
-
Vendor:Forge Motorsport
Ford Fiesta Mk8 ST & Puma ST Dump Valve
After huge demand, Forge have developed the perfect dump valve solution for the Fiesta ST MK8 and Ford Puma ST, two vehicles that Ford launched without an OEM valve included. Similar to our early days when Ford released the RS turbo Escort, Forge developed...- £257.03
- £257.03
- Unit price
- per
-
Vendor:Forge Motorsport
Hyundai i30N MK3.5 Facelift, Elantra N, & Kona N Turbo Inlet Adaptor
Manufactured from 6082 aerospace grade aluminium Black anodised for ultimate protection and durability Increased capacity of over 150% No engine check lights (EML) Perfect fit with our induction kit Increased air flow Made in the UK Lifetime warranty THIS WILL ONLY FIT 4"...- £142.79
- £142.79
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra
Suitable for both left and right hand drive - This replaces OEM part number 5WA.129.635 With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked...- £176.70
- £176.70
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Inlet Adaptor for VAG 1.0 TSI Engine
With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very...- £160.63
- £160.63
- Unit price
- per
-
Vendor:Forge Motorsport
Turbo Inlet Adaptor for Toyota Yaris GR and Corolla GR
The FMTIA8 is the new turbo inlet adaptor for the Toyota Yaris GR. Throughout the development process we have strived to improve the efficiency and performance of the Yaris GR’s engine and for this product we felt we would offer the whole inlet pipe...- £299.88
- £299.88
- Unit price
- per
-
Vendor:Forge Motorsport
High Flow Intake Hose for Audi, Cupra, VW (RHD ONLY)
Please note this product is only compatible with right hand drive vehicles - please read instructions fully before installation - for the LHD, please see FMTIA9 Introducing the Forge High Flow intake hose for the revised 2021 onwards MQB platform 2.0 DNF code engines. This product replaces the restrictive...- from £176.36
£208.15- from £176.36
- Unit price
- per
-
Vendor:Forge Motorsport
Toyota Yaris GR and Corolla GR Recirculating Valve
This recirculating valve has been developed for the Toyota Yaris GR Turbo engine that has the electronically controlled bypass valve (OE Part no. 7.04654.08). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles...- £234.60
- £234.60
- Unit price
- per
-
Vendor:Forge Motorsport
Toyota Yaris GR and Corolla GR Dump Valve
This Blow Off, or Dump valve, has been developed for the Toyota Yaris GR Turbo engine that has the electronically controlled bypass valve (OE Part no. 7.04654.08). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified...- £234.60
- £234.60
- Unit price
- per
-
Vendor:Forge Motorsport
Renault Megane RS 280/300 Turbo Inlet Adaptor
With the success of the existing range of Forge Motorsport product for the Renault Megane R.S 280/300, we have decided to further expand our tuning parts range for this vehicle. We are excited to release the FMTIA4 Turbo inlet adaptor. Designed and developed by...- £165.46
- £165.46
- Unit price
- per
-
Vendor:Forge Motorsport
Dump Valve for the VW Golf GTE, and Cupra Formentor and Leon
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner The Forge Motorsport dump valve for the VW Golf GTE The GTE doesn’t have a dump valve from the factory, so this product allows you to have the traditional dump valve...- £289.38
- £289.38
- Unit price
- per
-
Vendor:Forge Motorsport
Alfa Romeo MiTo QV Turbo Blanket
The Forge Motorsport FMTUB11 has been designed for the Alfa Romeo MiTo QV. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of...- £101.93
- £101.93
- Unit price
- per
- Choosing a selection results in a full page refresh.