AIRTEC Motorsport

The Focus ST & RS Models have been massively popular and tuning of these fast fords have been taken to amazing new levels, unfortunately the cooling radiator has always been a weak point, this is where are AIRTEC alloy radiator comes into play.We opted...

Cool that turbocharged classic with AIRTEC Motorsport. \n \nA neat cooling solution suitable for turbocharged Mk1 and Mk2 Escorts that require an intercooler and uprated radiator package. \n \nThe kit includes a 50mm core intercooler and 42mm core radiator as well as well as...

An affordable cooling solution to cool your Mk1 & Mk2 EscortDimensions:Height: 470mmWidth: 430mm (without brackets)Depth: 80mmCore Dimensions:Height: 350mmWidth: 425mmDepth: 42mmFeatures 42mm high flow performance tube & fin core Bolt on side brackets, which can be turned around to give extra clearance in the engine bay...

AIRTEC turbo cooler for the S2 Escort RS TurboCools down super heated water before returning it to the radiator, which helps prevent temperature spikes Kit includes: AIRTEC Motorsport turbo cooler 2 metres of silicone hose with four stainless-steel jubilee clips All required fixtures and fittings...

We specially commissioned PowerFlex to make us these uprated mounting bushes.\nThe polyurethane bushes replace the soft rubber Ford bushes usually used.\nReduces unwanted movement in intercooler and radiators by up to 65%.\nComes complete with stainless-steel inserts as well as stainless-steel fixing bolts and washers.\nAIRTEC Part...

As part of our expanding Cosworth product range, AIRTEC Motorsport is proud to launch our intercooler upgrade suitable for track or fast road use.Our slim line fan package includes twin 11" sucker fans that come complete with an engraved  alloy mounting frame.It's the ideal...

Bolt on BHP, by lowering the charge Air temperatures, a remapped car has increased power by ecu changes that raise boost pressure and other parameters, this increase in boost pressure raise intake temps and power loss soon follows, by fitting an up-rated intercooler you...

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless-steel zip ties.Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold...

After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Golf GT Mk5 1.4 TSI has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take...

AIRTEC Renault Clio RS Turbo cooler - fittings included.AIRTEC's Clio turbo cooler has been designed to cool the super heated water which comes out of the turbo before it goes back to the water header tank.By fitting a Turbo cooler you are increasing the efficiently of your...

As part of our expanding Mitsubishi product range, AIRTEC Motorsport is proud to launch our intercooler upgrade suitable for track or fast road use. \n \nIn order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have...

Ford Focus RS 2.5L Turbo Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the Focus RS IWG is easy to install and requires no special tools or...

Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV. APPLICATION: Fits most cars using the factory BOSCH or...

\n\n\n\n\n\n\n \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n \n\nAIRTEC Motorsport Stage 2 Intercooler Upgrade for Focus Mk3 1.0 EcoBoost\n\n\n \n\n \n Product Information\n \n\n\nAIRTEC stage 2 intercooler for the Focus 1.0 EcoBoost\nPerfect for a standard or tuned Focus 1.0 EcoBoost.\nAIRTEC have used their fully proven 50mm bar ‘n’ plate core with cast end tanks.\nFinished...

AIRTEC Motorsport intercooler for the Mercedes Smart 451. \n \nNew product from AIRTEC comes the new intercooler for the Smart 451.As fitted to the Smarts 4 You race cars this intercooler is a great upgrade to any standard or remapped Smart car. \nWill fit...

AIRTEC are proud to announce the latest intercooler for the VW Tiguan.\nAIRTEC has now added a great addition to it's growing range of performance intercoolers, in the way of this huge front mount intercooler for the VW Tiguan.\nGreat addition to any standard or re-mapped Tiguan.\nDimensionsWidth: 740mm Height: 170mmDepth:...

AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi RS3 (8P).Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.Featuring a huge 120mm core design together with high-flow, cast end...

The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180.Enhanced induction sound, great looks and loud recirculation dump valve noise on let off. Works great on standard cars as the perfect all-in-one induction upgrade, and even better suited to cars fitted with...

AIRTEC Fiesta ST 180 top induction pipe. \n \n \n \n \n \n \nReplace your standard Fiesta ST 180 plastic top induction pipe with our AS performance alloy top pipe. \nAvailable in Pro Series Black only. \n \nCan be fitted with our Stage 2...

Simple, fast, & easy to fit. Gain a great induction roar and even more importantly - gain power!Kit Contents: 1x ITG Maxogen Air Filter1x ITG Breather Filter - connects to rocker cover1x Pro Hoses Induction Hose (choice of hose colour)2x Stainless-steel Jubilee Clips Part number: ATIKFO10